熔體泵概述 General Information

　　熔體泵主要用于高溫高粘度聚合物熔體的輸送、增壓、計量。容體泵將來自擠出機的高溫塑料熔體增壓。穩壓后流量穩定地送入擠出機頭。其穩定熔體壓力、流量的能力優于各種類型的擠出機。國外廣泛應用于塑料、樹脂、橡膠制品的擠出成型。如：造粒、薄膜、管材、板材、片材等行業。隨著機械工業的日益發展，熔體泵在國內市場也逐漸地被行業人士所采納、應用。

　　Melt pump is mainly used in high temperature and high viscosity polymer melt transportation, pressurization, metering. The melt pump pressurizes and stabilizes pressure of hot melt polymers coming from the extruder, then send them into extruder dies. The pump's ability of stabilizing the pressure and flow is better than all kinds of extruders. Foreign countries widely apply in plastic, resin, rubber extrusion, such as pelletizing, film, pipes, plate, etc. With the increasing development of mechanical industries, melt pump is increasingly accepted and applied by domestic.

　　雙曲線齒形設計Hyperbolic tooth shape design

　　壓力脈動率更低 Lower pressure pulsation rate

　　防止剪切熱產生Preventing shear heat

　　非接觸免維護 Non-contact Free maintenance

　　螺旋密封設計Helical sealing design

　　無后顧之憂Free from any worries

　　先進的流道設計Advanced flow design

　　熔體停留時間短 Short residence time of melt stream

　　適用熱敏性材料Suitable for heat-sensitive material

　　專業輔助設計軟件 Professional auxiliary software design

　　優化軸承潤滑設計 Advanced bear lubrication design

　　有效延長使用壽命 Prolonging the service life